GET THE APP

Influence of coal power plant exhaust gas on the structure and pe | 54352
Journal of Chromatography & Separation Techniques

Journal of Chromatography & Separation Techniques
Open Access

ISSN: 2157-7064

+44 1300 500008

Influence of coal power plant exhaust gas on the structure and performance of ceramic nanostructured gas separation membranes


2nd International Conference and Expo on Separation Techniques

September 26-28, 2016 Valencia, Spain

K Wilkner, J Eiberger, M Bram, M E Ivanova and W A Meulenberg

Forschungszentrum Julich, Germany

Scientific Tracks Abstracts: J Chromatogr Sep Tech

Abstract :

Carbon capture and storage or utilization is a key technology to decrease CO2 emissions from conventional power plants, until cost efficient energy supply from renewable sources is possible. Membrane-based systems to capture CO2 from flue gas streams are considered a promising alternative to conventional absorption technology. In the present work the effect of coal power plant exhaust gas on amino-modified mesoporous ceramic membranes was investigated. Testing membranes in direct contact with exhaust gas represents a new approach, as testing under simulated flue gas conditions has already been undertaken. Flue gas exposure experiments were carried out at a lignite-fueled power plant and a hard-coal-fueled power plant. Most experiments were conducted using a test rig designed to bring planar membrane samples in direct contact with unconditioned flue gas in the exhaust gas channel. Another test rig was designed to test membrane modules with pre-treated flue gas. The tested membranes had an asymmetric structure consisting of a macroporous �?±-Al2O3 support coated with a mesoporous �?£-Al2O3 or 8YSZ interlayer. The microporous functional top layer was made of amino-functionalized silica. The tests revealed different degradation mechanisms such as gypsum/fly ash deposition on the membrane surface, pore blocking by water condensation, chemical reactions and phase transformation. A detailed analysis was carried out by XRD, XPS and SEM to evaluate their impact on the membrane in order to assess membrane stability under real conditions. The suitability of these membranes for this application is critically discussed and an improved mode of membrane operation is proposed.

Biography :

K Wilkner holds a Diploma in Physical Engineering from the University of Applied Science Aachen. Since 2011, he has been working at the Institute of Energy and Climate Research: Materials synthesis and processing (IEK-1) in Forschungszentrum Julich. Since 2012, one of his responsibilities is to test membranes in direct contact with flue gas of lignite and hard-coal-fueled power plants.

Email: k.wilkner@fz-juelich.de

Top