Instructions for Authors
Journal of Thermodynamics & Catalysis provides the rapid tri annual publication of articles in all areas related to Chemical Engineering. The journal of Thermodynamics & Catalysis welcomes the submission of manuscripts that meet the general criteria of significance and scientific excellence.
The journal covers all basics areas in chemical engineering including Chemical Engineering, Entropy, Entalphy, Biocatalysts, Photo Catalysis, Industrial Catalysts, Homogenous Catalysts, Heat Flows, Chemical Thermodynamics, Atmospheric Thermodynamics, Biological thermodynamics, Equilibrium Thermodynamics, Non-equilibrium Thermodynamics, Solution Kinetics, Molecular Thermodynamics, Thermodynamics Experiments Updates, Thermodynamics Material science, Thermodynamics Databases and Analysis, Applied Thermodynamics, Modern Thermodynamics, Biochemical Thermodynamics, Protein Folding Thermodynamics, Protein Thermodynamics, Thermodynamics physics, Molecular Catalysis, Organometallic Catalysis, Nucleophile Ctalysis, Proline Catalysiis, Spectroscopy and Catalysis, Nanomaterials in Catalysis, Oxidation Catalysis
As a member of Publisher International linking Association, PILA, Journal of Thermodynamics & Catalysis (of Longdom Publishing SL) follows the Creative Commons Attribution License and Scholars Open Access publishing policies.
Submit manuscript at https://www.scholarscentral.org/submission/thermodynamics-catalysis.html or send as an e-mail attachment to the Editorial Office at [email protected]
A manuscript number will be e-mailed to the corresponding author within 72 hours.
Note: Authors are sole responsible for any scientific misconduct including plagiarism in their research articles; publisher is not responsible for any scientific misconduct happened in any published research article. As a publisher we will follow strictly scientific guidelines and EIC’s advice to retract or erratum of any article at any time if scientific misconduct or errors happened in any articles.
Longdom Publishing SL Policy Regarding the NIH Mandate
Longdom Publishing SL will support authors by posting the published version of articles by NIH grant-holders to PubMed Central immediately after publication.
Article Processing Charges:
As with any other open access publication, the journal of Thermodynamics & Catalysis operates through processing and handling fee received from authors, which is utilized in meeting the maintenance charges of the respective journal. The model is pursued in order to present free articles for readers without subscription charges. Authors are required to make the payment once the manuscript is cleared to be published by reviewers.
The basic article processing fee or manuscript handling cost is as per the price mentioned above on the other hand it may vary based on the extensive editing, colored effects, complex equations, extra elongation of number of pages of the article, etc.
Submission of an Article
In order to reduce delays, authors should adhere to the level, length and format specified at every stage of processing right from manuscript submission to each revision stage. Submitted articles should have a 300 words summary/abstract, separate from the main text. The summary should provide a brief account of the work by clearly stating the purpose of the study and the methodology adopted, highlighting major findings briefly. The text may contain a few short subheadings of no more than 40 characters each.
In order to accomplish its vision to make scientific & health care information open access and to disseminate the scientific knowledge all around the world Longdom Publishing SL made a new initiation.
As Longdom Publishing SL open access journals are accessed and read by a global audience, the language translation feature translates the published articles in international languages like Japanese, Chinese, German and more. Authors who are interested to publish translated version of their paper in languages including Chinese, Japanese etc., are billed in excess of $100 along with the article processing charges. Accepted papers will be published in both English as well as author recommended language(s)
Article Preparation Guidelines
Longdom Publishing SL accepts various formats of literary works such as research articles, reviews, abstracts, addendums, announcements, article-commentaries, letters to the editor; annual meeting abstracts, conference proceedings, calendars, case-reports, and associated commentaries.
Authors are expected to attach an electronic covering letter completely mentioning the type of manuscript (Research article, Review articles, Brief Reports, Case study etc.) Unless invited on a special case, authors cannot classify a particular manuscript as Editorials or Letters to the editor or concise communications.
Confirm that each individual named as an author meets the uniform requirements of the Journal of Thermodynamics & Catalysis criteria for authorship.
Please make sure that the article submitted for review/publication is not under consideration elsewhere simultaneously.
Clearly mention financial support or benefits if any from commercial sources for the work reported in the manuscript, or any other financial interests that any of the authors may have, which could create a potential conflict of interest or the appearance of a conflict of interest with regard to the work.
A clear title of the article along with complete details of the author/s (professional/institutional affiliation, educational qualifications and contact information) must be provided in the tile page.
Corresponding author should include address, telephone number, fax number, and e-mail address in the first page of the manuscript and authors must address any conflict of interest with others once the article is published.
Title page is page 1. On the first page, type the running head (short title for top of each page), title (which cannot include any acronyms), names of the authors and their academic degrees, grants or other financial supporters of the study, address for correspondence and reprint requests, and corresponding author's telephone and fax numbers and e-mail address.
Cover Letter: A cover letter of 500 words should accompany the manuscript outlining the scope and purpose of research, along with email and postal address for communication.
Introduction: The initial paragraph in the research article for Thermodynamics & Catalysis manuscript should capture a reader’s interest the attention of researchers and professionals in chemical properties of compounds and the formulations including the pathways and sites of action.
Title: The title section should be provided with the mention of the brief overview of the contents in the Thermodynamics & Catalysis paper that give an idea of the scope of research. This should be wrapped up within a line or phrase consisting of around 25 words.
Author information: The Telephone, Fax, and E-mail address should be mentioned along with complete names and credentials supported by required documents.
Abstract: The submitted manuscripts for Thermodynamics & Catalysis journal should have an exclusive abstract of 300 words apart from the main article. It should comprise of the brief account of the research and the principle of research, and might contain short-headings of about 40 characters, with overall conclusion into a general context. Abbreviations should be avoided to the maximum extent.
Materials and Methods: This section must contain the several materials and procedures used, along with the observation and analysis of the results and conclusion. Separate enclosure or appendix must be provided for tables and figures. Excel file cannot be placed as an embedded object as this violates the integrity of the research article in Thermodynamics & Catalysis.
Results: A detailed explanation about the inferences gathered from the experiment and the observations, which would also pave the way for its practical usage and wider application in other genres.
Acknowledgment: It mentions the details of the grants and the underlying contributions received in cash and moral guidance for the studies.
Other article types:
1. Letter to the editor
It is a form of a communication with the editor in chief or fellow editors to express a particular opinion about any matter directly associated with the area of chemistry research. The specific outcome and modes of application in the Thermodynamics & Catalysis can be mentioned and discussed in the letter. The letter must be in a formal language and should be compatible with the journalistic mode of communication, as it is mostly addressed to an editor in chief or persons in a similar capacity. The general audience and readers of the Thermodynamics & Catalysis journal can also get their queries answered regarding the content and its layout and structure.
As a large global audience from diverse backgrounds and schools of thought goes through an open access journal, the Thermodynamics & Catalysis journal also accepts feedbacks in the form of crisp and short commentaries with reference to the methodologies or subsequent research findings. The readers can express their views in form of writing to the respective editor or author, thereby building a rapport to inform about several aspects related to appearance, and rendering of the content and works of the Thermodynamics & Catalysis journal. The commentary and opinion about the scope of the article must reach within six months of publication.
These should be used at a minimum and designed as simple as possible. We strongly encourage authors to submit tables as .doc format. Tables are to be typed double-spaced throughout, including headings and footnotes. Each table should be on a separate page, numbered consecutively in Arabic numerals and supplied with a heading and a legend. Tables should be self-explanatory without reference to the text. Preferably, the details of the methods used in the experiments should be described in the legend instead of in the text. The same data should not be presented in both table and graph form or repeated in the text. Cells can be copied from an Excel spreadsheet and pasted into a word document, but Excel files should not be embedded as objects.
Images and illustrations are important elements without which the story is incomplete; and the same holds true for sciences and research domain. The images posted or published in connection with Thermodynamics & Catalysis journal have to be in a high resolution so that those can be interchangeable and compatible with various formats including full-text and html. Tools like can be used to develop images of fine detail associated with particular research theme (such as ChemDraw to present bonds and molecular structures pictorially. Suitable legend for the image is strongly recommended.
Proofing and reprints:
The evidence of proofing would be sent in an electronic form to the author of Thermodynamics & Catalysis journal through an email as a pdf attachment, and authors can print unlimited number of copies once they download the pdf. No modifications are made to the manuscript at the proof stage except for spelling or basic errors. Authors can also have access to the full-text versions of their work.
The submitted manuscript should not be under publication anywhere else, except for usage as a help or instruction guide. All works published by Longdom Publishing SL are under the terms of the Creative Commons Attribution License. Accordingly, subsequently published articles can copy, distribute, and adapt the original work with proper citation.