Journal of Agricultural Science and Food Research
Open Access

Irrigation & Drainage Systems Engineering-innovations

The field drains of a surface system may be arranged in many patterns. Probably the two most widely used are parallel drains and random drains. Parallel drains are channels running parallel to one another at a uniform spacing of a few to several hundred metres apart, depending on the soil and the slope of the land. Random drains are channels that run to any low areas in the field. The parallel system provides uniform drainage, whereas the random system drains only the low areas connected by channels. In either case the channels are shallow with flat sides and may be farmed like the rest of the field. Crops are usually planted perpendicular to the channels so that the water flows between the rows to the channels. Some land grading of the fields where surface drains are installed is usually essential for satisfactory functioning. Land grading is the shaping of the field so that the land slopes toward the drainage channels. The slope may be uniform over the entire field or it may vary from part to part. Historically, the calculations necessary for planning land grading were time-consuming, a factor that restricted the alternatives available for final design. Today, computer models rapidly explore many possibilities before a final land grading design is selected.