Journal of Clinical Microbiology and Antimicrobials

Journal of Clinical Microbiology and Antimicrobials
Open Access

Value Added Abstract - (2020)

Production and injection of polymer gel design, into the oil-producing interval of a sandstone reservoir to prevent extra produced water

 

Author info »

Abstract

In this paper, according to actual condition of this oil field, a suitable polymer will be designed and built, then, its optimum composition with least amount of additives, best thermal resistance property, resistant to salt and acid and long life time will be determined using rheological tests as a standard method to specify polymer gel properties. Finally, performance of this optimized polymer gel will tested experimentally using several cores of this sandstone reservoir. Rheological properties of polymer gel and its relationship to reservoir rock permeability will be investigated. For this purpose, a set of experimental tests based on rheological, swelling and core flooding tests on sandstones will be designed. So, by deriving mathematical relationships, effect of concentration and type of polymer and ratio of networking factor concentration to polymer on total visco-elastic properties and three dimensional network parameters of polymer gel will be stated.

Author Info

 

Copyright: This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Top