Awards Nomination 20+ Million Readerbase
Indexed In
  • Open J Gate
  • Genamics JournalSeek
  • Academic Keys
  • JournalTOCs
  • ResearchBible
  • China National Knowledge Infrastructure (CNKI)
  • Scimago
  • Ulrich's Periodicals Directory
  • Electronic Journals Library
  • RefSeek
  • Hamdard University
  • EBSCO A-Z
  • OCLC- WorldCat
  • SWB online catalog
  • Virtual Library of Biology (vifabio)
  • Publons
  • MIAR
  • Scientific Indexing Services (SIS)
  • Euro Pub
  • Google Scholar
Share This Page
Journal Flyer
Flyer image
Investigation of impact of carbon nanotubes on a polysulfone membrane for oil - water treatment
4th International Conference on Nanotek & Expo
December 01-03, 2014 DoubleTree by Hilton Hotel San Francisco Airport, USA

B D Nkazi, S L Omalanga and S E Iyuke

Posters: J Nanomed Nanotechnol

Abstract:

Blended polysulfone (PSF) membrane was produced by the immersion precipitation phase inversion method using three different solvents: Chloroform, dimethylformamide and tetrahydrofurane. Multi ? walled carbon nanotubes (MWCNTs) functionalized by acid treatment were synthesized using chemical vapour deposition. Scanning Electron Microscope (SEM) was used to view the morphology of the blended membrane and CNTs. The Raman spectroscope was used to confirm the functionalization of the MWCNTs by comparing the defects on the CNTS introduced by acid treatment. It was found that the Flux, permeation properties, Selectivity improve with the content in MWCNTs composition in the polymeric membrane. The membrane with the most MWCNTS composition (0.4% w/w CNTS) demonstrated the highest flux and solute rejection. The blended polysulfone membrane produced with the three different solvents with functionalized MWCNTs increase the permeate flux. The greatest effect of blending with functionalized MWCNTs was experienced by the polysulfone membrane produced from the dimethylformamide solvent since it had the highest increase percentage of 97.87.