Conference abstractPublished 7 Nov 2018

Compact design of high contact ratio gears

Authors: Tuan Nguyen

University of Memphis, USA

Ask about this article

Abstract

Select any words in the title or abstract, or press this and choose a sentence.

This study presents a computer simulation for the dynamic design of compact high contact ratio spur gear transmissions. High contact ratio gears have the potential to produce lower dynamic tooth loads and minimum root stress but they can be sensitive to tooth profile errors. The analysis presented in this work was performed by using the NASA gear dynamics code DANST (Dynamic Analysis of Spur Gear Transmissions). In the analysis, the addendum ratio (addendum/diametral pitch) was varied over the range of 1.30 to 1.40 to obtain a contact ratio of 2.00 or higher. The constraints of bending stress limit and involute interference provide the main criteria for this investigation. The compact design of high contact ratio gears with different gear ratios and pressure angles was investigated. Comparison of compact design between low-contact-ratio and high-contact-ratio gears was conducted. With the same operating parameters, high contact ratio gears appear to have much more compact design than low contact ratio gears. For the compact design of high contact ratio gears, a diametral pitch of 6.00 appears to be the best choice for an optimal gear set.

Subjects

Engineering

Ask about this article

Answers come only from this article's title, abstract and keywords, each sentence pointing to where it comes from. Your question is sent to OpenAI to write the answer. Longdom does not store it.

Try:

More from this journal

The newest in Journal of Aeronautics & Aerospace Engineering.

All its articles

Conferences in this field

Upcoming conferences in this field.

Follow

New articles from what you follow go into your email digest, once you agree to alert emails.

  • JournalJournal of Aeronautics & Aerospace Engineering
  • SubjectEngineering
  • BylineArticles whose byline prints “Tuan Nguyen”