Abstract

Occurrence and Significance of Secondary Iron-rich Products in Landfilled MSWI Bottom Ash

Saffarzadeh A and Takayuki Shimaoka

Incineration is one of the most effective techniques for the treatment of both municipal and hazardous wastes. Via this technique, the majority of toxic substances are expected to be stabilized in the durable matrix of the end-ofprocess bottom ash products. These products consist of a variety of glassy/crystalline components including primary Fe-rich phases that may undergo alterations when exposed to natural environment. In the present research, the impact of natural weathering on the behavior of primary Fe-rich phases, their alteration, and the formation of the relevant secondary products in the weathered bottom ash samples of a (mono) landfill site was systematically investigated. Samples of various ages (1-20 yrs) were collected from four locations of the landfill in 2009. Optical microscopy, SEM-EDX, XRD and XRF examinations were applied in order to document the footprints of weathering
processes. Using these techniques, we understood that several secondary (newly-formed) products (amorphous or crystalline) have been developed, including goethite (α-FeOOH), lepidocrocite (γ-FeOOH), hematite (Fe2O3), magnetite (Fe3O4), iron oxide (FeO), and Fe-rich Ca-Si and Ca-Al-Si gel phases. They occurred under variable environmental conditions as the weathering products of the primary iron-rich phases. The strong affinity of these secondary phases with heavy metals of environmental significance such as Zn, Cu, Pb, and Ni was also identified. This suggests that the development of secondary Fe-rich products can partially contribute to the reduction of heavy
metals release to the surrounding environments. However such phenomena may have inhibitory effect on the utilization of bottom ash as recycled aggregates.